Single conductor SGC connectors are used today in connectivity between antennas and circuit boards in mobile product applications. Mass terminated SGC connectors came into use in the early 90′s in the manufacturing of ultrasound devices. Today, mass terminated SGC connectors are used where flat panel displays are connected internally to a graphics card for LVDS or eDP applications. Most SGC connectors use a plastic connector body with stamped metal contacts molded into the plastic, a grounding bar for the shielding and a shell to house the assembly in.
Major SGC connector manufacturers typically manufacture their own mated pair of connectors in each connector family they offer. They provide both a board mount receptacle connector (board side) which inter-mates to a plug connector (cable side) terminated onto the end of the cable. Care must be taken when ordering parts from two different manufacturers to create a mated pair.
A plug from one manufacturer may not intermate to a receptacle from another manufacturer, even though they look the same to the naked eye. While most manufacturers of SGC type connectors provide both plug and receptacles as a mated pair and guarantee inter-mateability, not all manufacturers of SGC connectors are inter-mateable between manufacturers. Subtle nuances in contact plating, contact alignment and connector body characteristics can prevent two different manufacturer’s products from working optimally together.
Even though there are standards in the marketplace for certain styles of SGC connectors, such as the VESA standard, there is still no guarantee of optimal inter-mateability. It is usually safest to use the same manufacturer’s plug and receptacle in your application. Make sure your manufacturing source provides the data to prove their claims to inter-mateability with their competitors. The temptation to save a little money by going with a mixed pair could cost you far more than you thought you were saving. Even if a manufacturer licenses a competitor to make the same connector, you will need proof of inter-mateability from the licensee.
Cable customized,Cable OEM,Cable Assemblies,LCD Harness,LCD cable,SGC cables,MCC cable.MCX cable,I-PEX cable,LVDS cable,Cable Manufacturers,cables factory,Cable Suppliers,IPEX cable,IDC Cables,20455-040E,20474-030E,20525-030E,20347-040E,ACES 88441,ACES 91209,sur,XSR,Small Gauge Coaxial Connector,CABLINE-CA,20524-030T-01,20524-040T-01,Shell 2764-0301,2764-0401,Pull Bar 2766-0301,2766-0401,Receptacle 20525-030E-02,I-PEX 20525-040E-02,Note PCcable,Tablet PCcable,Flat Panel Display cable,IPX 20525-030E,IPEX20524-030T
Welcome to contact us for more information or OEM/ODM the mating cable.
Cell Phone: +86-158-8966-1771 Atten: Jacky
E-mail: jacky@micro-coaxial.com
Skype: jacky882010
MSN: jacky882010@hotmail.com